Honda Pioneer SXS700M2P 2019 Owner's Manual page 65

Seat Belt Speed Limiting System
When the driver's seat belt is not latched properly, the maximum
vehicle speed will be limited by the seat belt speed limiting system.
When the driver's seat belt is not latched, the seat belt speed limiting
system will:
• Limit the maximum vehicle speed to no more than
24 km/h (15 mph).
• Cause the seat belt indicator and speedometer to blink
simultaneously.
To return the vehicle to normal operation the driver must:
1. Properly deploy and latch their seat belt.
2. Release the throttle for one second if the vehicle is moving.
The speed limitation will be removed and seat belt indicator and
speedometer will stop blinking after the driver follows this procedure
and correctly deploys and fastens their seat belt.
To avoid speed limitations altogether, the driver should always
deploy and fasten their seat belt (and require all passengers to be
securely belted) before driving the vehicle and keep their seat belt
fastened while underway. If the driver unlatches their seat belt while
the vehicle is travelling at speeds greater than 24 km/h (15 mph), the
vehicle speed will be limited to 24 km/h or less until the driver's seat
belt is deployed and properly latched and throttle is released for one
second.
Seat Belts
Instruments & Controls 55