3.3.3
Connection P rofiles
This page allows the user to configure the user data connections (shared and dedicated) by selecting an
APN profile and an activation method.
Connection Watchdog: This section allows the user to enable the Connection Watchdog feature
•
in order to monitor the traffic. The user can also configure the following options:
–
Traffic Monitoring:
Do not monitor
•
Monitor only incoming
•
•
Monitor only outcoming
•
Monitor bi-directional
–
Traffic Period: This is the period of the traffic monitoring feature. This value should be set
based on the expected data usage of the terminal. The default duration is 10 minutes.
–
Always Send Pings: This feature allows the UT to send pings, even when the traffic flow is
detected.
–
Ping Servers: This displays the IP addresses of servers to be used when verifying link
connectivity.
16
Chapter 3 • Using the Web UI
H62751 Revision C
Figure 5: APN Profiles page