Recorder - UNI-T UTD2000 Series User Manual

Create
Horizontal 1-200Pixel
Vertical 1-100Pixel
Return
Back

10.2 Recorder

The waveform recorder function at the UTD2000 series DSO is generally easy to
operate. User should set up Source and Operation as in below table.
Table 10-6 Recorder menu
Function Menu Setting
CH1
Source CH2
CH1+CH2
●
Operation
■
Save 1~200
Load 1~200
Back
You will need to press F1 to confirm creating the pixel template after setting the
horizontal and vertical length of the pixels.
UTD2000 Series User Manual
According to adjustment, build horizontal and vertical Pass/Fail tolerance range.
Press F2 to select horizontal length and use the multi-purpose knob to set the
pixel length for the horizontal length;
Press F3 to select vertical length and use the multi-purpose knob to set the pixel
length for the vertical length;
Return to pass detection menu
Return to Utility function menu
Description
Select CH1 as recording signal source
Select CH2 as recording signal source
Select CH1and CH2 as recording signal sources
Press to start waveform recording;
The number waveform being recorded is show on the screen.
Press to start waveform replay
Press to stop waveform recording
Save waveform recording into USB memory; Select from 1-200 memory location;
Press F3 to save.
Loadthewaveform recording into USB memory; Select from 1-200 memory
location; Press F4 to load.
Press to return to Utility function menu
44