Kohler Sterling 7110 Series Installation Manual page 3

Before You Begin (cont.)
This bath is designed for alcove installations.
Do not remove the old fixture before you unpack and inspect the new unit.
If remodeling, measure the existing framework before removing the old fixture to ensure the new
unit will fit. Make sure that the drain is in the correct location.
Confirm that there is adequate mounting and connection space for the water supply and drain
chosen for the installation.
Upon receipt, check for shortages or damage. Report any shortages or damage immediately.
Store the bath and wall surrounds in a safe place until you begin installation to avoid damage.
The apron panel is not removable on bath units.
Sterling 3 1021859-2-E