STEP 1: Charge the watch
Be sure to charge the watch before using it.
Use the charger cable that comes with the watch to charge using a USB-AC
adaptor, or by connection to a computer or other device.
Note that the setup of a computer may not support charging from its USB
●
port.
Connect to a USB (Type A) port
Make sure the charger cable connector is oriented correctly when plugging
●
it into a USB port.
Charger cable
(included with watch)
Important!
The USB-AC adaptor or other USB power supply device you use must
●
meet certain specifications. Do not use an inferior adaptor or device that
does not meet the required specifications. Doing so can cause
malfunction and breakdown of the watch and USB power supply device.
Also note that use of a USB-AC adaptor may be subject to local
standards imposed by the country where you are located. CASIO
COMPUTER CO., LTD. shall be held in no way liable for any malfunction
or break down of the watch and/or USB power supply device caused by
use of an inferior adaptor or device that does not meet the required
specifications.
USB (Type A) port
Voltage: 5 V
Current: 0.5A min.
The connection is magnetic.
EN-25