Cisco SGE2000 Administration Manual page 46

Security Settings
The Security Settings screen enables you to configure security settings on the Ethernet switch,
as well as generate and display the certificate.
Use the SSL Certificate Generation screen to specify a device-generated certificate.
The following fields are specified:
Public Key Algorithm
Public Key Length
Common Name (FQCN)
Department Name
Organization Name
Locality or City Name
State or Province Name
41
Specifies the SSL type
Specifies the SSL RSA key length. (Range: 512 to
2048)
IP address of the Ethernet switch
Specifies the department name. (Range: 1 to 32
characters)
Specifies the organization name. (Range: 1 to 32
characters)
Specifies the location or city name. (Range: 1 to 32
characters)
Specifies the state or province name. (Range: 1 to
32 characters)
Linksys One Ready Communications Solution
Chapter 4: Console Configuration
Configuring the Switch through the Console or Telnet Interface
4