Toyota Yaris Owner's Manual page 80

QS13045a
Upper anchorage strap
Attaching clip
Anchor fitting
TO USE THE CHILD
ANCHOR FITTING:
Fix the child restraint system with the
seat belt.
Open the cover of the child restraint
anchor fitting and attach the child re-
straint anchor attaching clip to the
child restraint anchor fitting. Make sure
the clip is securely attached and tight-
en the upper anchorage strap.
For instructions to install the child re-
straint system, see "Child restraint" on
page 58 in this Section.
CAUTION
Make sure the seat belt is securely
locked, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
—Installation with ISOFIX
rigid anchors (ISOFIX child
restraint system)
RESTRAINT
PS13591
The exclusive fixing bars for the child
restraint systems using ISO specifica-
tions are installed in the rear seat.
The bars are installed in the gap between
the seat cushion and seatback of both
outside rear seats.
Child restraint systems using quasi−ISO
specifications can be fixed to these exclu-
sive fixing bars. In this case, it is not
necessary to fix the child restraint system
with a seat belt.
73