Toyota Yaris Owner's Manual page 192

—Reinstalling wheel
ornament (steel wheels)
PS41008
10. Reinstall the wheel ornament.
1. Put the wheel ornament into position.
Align the cutout of the wheel ornament
with the valve stem as shown.
2. Press hand firmly on one side of wheel
ornament and then firmly tap the other
side around the edge of wheel orna-
ment with the heel of your hand to
snap into place.
CAUTION
Take due care in handling the orna-
ment to avoid unexpected personal
injury.
—After changing wheels
11. Check the air pressure of the re-
placed tire.
Adjust the air pressure to the specification
designated on page 238 in Section 8. If
the pressure is lower, drive slowly to the
nearest service station and fill to the cor-
rect pressure.
Do not forget to reinstall the tire inflation
valve cap as dirt and moisture could get
into the valve core and possibly cause air
leakage. If the cap is missing, have a new
one put on as soon as possible.
12. Restow all the tools, jack and flat
tire securely.
As soon as possible after
wheels, tighten the wheel nuts to the
torque specified on page 238 in Section
8 with a torque wrench. Have a technician
repair the flat tire and replace the spare
tire with it.
CAUTION
Before driving, make sure all the
tools, jack and flat tire are securely
in place in their storage location to
reduce the possibility of personal in-
jury during a collision or sudden
braking.
NS41515
Aluminum wheels:
changing
Before stowing the flat tire, remove the
center wheel ornament by pushing from
the reverse side.
Be careful not to lose the wheel ornament.
185