Toyota Yaris Owner's Manual page 103

Odometer, two trip meters
and instrument panel light
control display
QS16005a
96
The following information is shown in
this display.
1. Odometer—Shows the total distance
the vehicle has been driven.
2. Two trip meters—Show two different
distances driven independently since
the last time when each trip meter was
set to zero.
You can use one trip meter to calculate
the fuel economy and the other to
measure the distance on each trip.
3. Instrument panel light control display
(when the headlight switch is on)—
Shows the brightness of the instrument
panel lights. The more amount the bar
gains, the brighter the instrument panel
light gets.
4. Trip meter reset knob/instrument panel
light control knob—Reset the two trip
meters to zero, change the meter dis-
play, and adjust the brightness of the
instrument panel lights.
To change the meter display, quickly
push and release the knob. The meter
display changes from the odometer to
trip meter A, trip meter B and instru-
ment panel light control display in or-
der, then back to the odometer each
time you push.
To reset the trip meter A to zero, dis-
play the trip meter A reading, push and
hold the knob until the meter is set to
zero. The same process can be applied
for resetting the trip meter B.
To adjust the brightness of the instru-
ment panel lights, display the instru-
ment panel light control reading, push
and hold the knob until the desired
brightness is obtained.