Toyota Yaris Owner's Manual page 128

When receiving FM:
Push "TA" to switch the radio mode to TP
(Traffic Program). "TP" will appear on the
display.
In the TP mode, the radio will begin seek-
ing a TP station. If the radio seek out a
TP station, the program name will appear
on the display. If the TA station is re-
ceived, the radio will be switched to the
traffic information program automatically.
When the program ends, the initial opera-
tion resumes. When also in AF mode, the
radio will seek a TP station by using the
AF list.
Push "TA" once again to switch the radio
mode to TA. "TA" will appear on the dis-
play and the radio will mute the volume
of FM station.
In the TA mode, the radio will begin seek-
ing a TP station. It sounds only when a
TP station is received. When a TP station
is received, the program service name will
appear on the display. In the AF mode,
the radio will also begin seeking a TP
station by using the AF list.
While the radio is seeking a TP station,
"TP SEEK" appears on the display. If the
radio cannot seek out any TP stations,
"NOTHING" will appear on the display for
2 seconds and the radio will begin seek-
ing a TP station again.
If the TP signal is halted for 20 seconds
after the TP mode was set, the radio will
seek another TP station automatically.
When listening to a compact disc:
Push "TA" to switch the radio mode to TA.
"TA" will appear on the display.
When the traffic information
starts, the "CD" mode is interrupted and
the traffic information is automatically
broadcasted. When the program ends, the
initial operation resumes.
"TA" volume memory function—The volume
at receiving the traffic announcement is
memorized.
The range of volume memory is limited:
if the volume received previously is great-
er than the maximum range of the volume,
this will become the maximum range and
if it is less than the minimum, this volume
will be the minimum range.
You can adjust the volume independently
from the memorized "TA" volume range
while receiving a "TA" station. (Refer to
"PWR·VOL".)
To return to the normal mode from the TA
mode, push "TA" once again.
TEXT
Compact disc player
This button is used to change the display
for the compact disc that contains text
data.
To change the display, quickly push and
program
release the "TEXT" button while the com-
pact disc is playing. The display changes
in the order from the elapsed time to disc
title to track title, then back to the
elapsed time.
If this button is pushed while a compact
disc that does not contain text data is
playing, "NO TITLE" will appear on the
display.
If the entire disc or track title does not
appear on the display, push and hold the
button until you hear a beep. The rest of
the title (up to 24 letters) will appear.
TUNE (Tuning)
Turn the knob clockwise to step up the
frequency. Turn the knob counterclockwise
to step down the frequency.
121