Kohler KD83V16 Service And Repair Manual page 73

Service and Repair Manual
u Pass flywheel groove index 1.
Step 8
u Stop at flywheel groove index 2.
u Set valve clearance for cylinders A1, A2 and B5, B7.
clearance, page 74.)
Step 9
u Pass flywheel groove index 6.
Step 10
u Pass flywheel groove index 3.
Step 11
u Stop at flywheel groove index 4.
u Set valve clearance for cylinders A4, A6 and B1, B3.
clearance, page 74.)
Valve set order (alternative method)
Information
There is a marking on the flywheel to set the valve clearance.
The marking may become illegible.
The only possibility is to set by overlap position.
Ignition TDC* A1 B7 A2 B5 A4 B3 A6 B1 A8 B2 A7 B4 A5 B6 A3 B8
Overlap TDC** A8 B2 A7 B4 A5 B6 A3 B8 A1 B7 A2 B5 A4 B3 A6 B1
* Ignition order
** Opposite cylinder (overlap)
Tab. 15: Valve set order
u Set cylinder to overlap TDC position.
u Adjust valve clearance of ignition TDC cylinder.
KD83V16 33525088901_2_1 EN_US
2021-07
, (For more information see: Setting valve clearance, page 74.)
, (For more information see: Setting valve clearance, page 74.)
© 2021 by Kohler Co. All rights reserved.
(For more information see: Checking valve
(For more information see: Checking valve
Repair
Rocker arms
73