1. 8-blade reel adjustment
2. 11-blade reel adjustment
Setting the Reel Speed
To achieve a consistent, high quality of cut and a
uniform after-cut appearance, you must set the reel
speed controls (located under the seat) correctly.
1.
Select the height of cut at which the cutting units
are set.
2.
Choose the desired ground speed best suited
for conditions.
3.
Use the graph on the reel speed chart decals
(Figure 40
and
Figure
proper reel speed setting.
Note:
Take note of the reel-speed number.
4.
Open the platform cover
Model 03821
41), to determine the
(Figure
42).
Figure 41
3. Read the Operator's Manual for information on adjusting the
reel.
1. Reel speed chart decal
(platform cover)
5.
Rotate the knob
manifold until the indicator arrow is in line with
the reel-speed number that you determined in
step 3.
Note:
You can increase or decrease the reel
speed to compensate for turf conditions. When
using baskets, increase the reel speed to
improve collection performance.
34
Figure 42
2. Mower manifold
(Figure
43) of the mower
decal133-4901
g352088