Toro Reelmaster 3555 Operator's Manual page 8

1. Lower the cutting units.
2. Raise the cutting units.
3. Pull up to engage the cutting units.
4. Push down to disengage the cutting
units.
120-2105
5. Read the Operator's Manual for
information on starting the engine—sit
in the operator's position, turn the key
to the engine preheat position, wait
until the engine preheat light turns off,
turn the key to the engine start position,
and disengage the parking brake.
6. Read the Operator's Manual
for information on stopping the
engine—disengage the cutting units,
turn the key to the engine stop position,
remove the key from the ignition, and
engage the parking brake.
7. Engine—Shut off
8. Engine—Preheat
8
9. Engine—Start
10. Lights
11. Fast
12. Slow
decal120-2105