Table of Contents
Advertisement
PCM-D10
4-9. Log
The simple service log can be outputted.
(The used time, the charging time, the number of times of pressed
the buttons, etc.)
Procedure:
1. Enter the test mode.
(Refer to "1. SETTING THE TEST MODE" on page 51)
2. Press the [
DPC]/[ A-B
v
Test mode menu screen
Version
Contrast Setting
LCD LED Light
Sleep
OFF DeepSleep
Power Down
Key Count
HotPlug Count
Log
3. Press the [
] button to display the Log output screen.
N
Screen display
WRITE :
CLEAR :
EXPORT :
4. Press the [
] button to complete the log writing, "Success" is
N
displayed.
Screen display
WRITE :
CLEAR :
EXPORT :
54
] buttons to select the "Log".
V
Play
VOL+ [0/5]
Option
Success
VOL+ [0/5]
Option
– Continued to upper right –
5. With connecting the this unit to the PC, press the [OPTION]
button to output to the log fi le on the root of this unit.
Note 1: Number of log fi le name is the date that has been set on this unit.
Note 2: By releasing the test mode, and be connected this unit to the PC in
the normal mode, can not see the log fi le.
PC
To USB port
USB Type-C cable
PC screen (root of this unit)
[OPTION] button
6. Press the [OPTION] button again to release the connection of
this unit and the PC.
7. Press the [ BACK/ HOME] button, return to test mode menu
screen.
4-10. Erase IPL2
Note: This mode do not execute absolutely in the service.
When execute this mode, fi rmware is destroyed.
4-11. Initialize Menu
Note: Not used for the servicing.
Sony CONFIDENTIAL
For Authorized Servicer
USB
Type-C port
PC
log file
SYS SET
Advertisement
Table of Contents
