Table of Contents
Advertisement
PCM-D10
5. Search "PCM-D10" on a smartphone etc. and register each other
equipment.
(The fi gure below is a reference example)
Tap
Tap "PCM-D10"
Note 6: If the device registration (pairing) information is deleted from this
unit and the pairing information of this unit remains in the other
device, delete the pairing information and pair again.
6. Check that you can pair with the smartphone etc. without prob-
lem.
12
Tap
Tap
Tap "PCM-D10"
1
Tap "
" to return
g
2
3. Check that the Bluetooth connection of this unit and
the smartphone on which REC Remote is installed can
keep connection at a practical distance
Continue from the state of step 6 on the left and follow the procedure
below to check that the Bluetooth connection of this machine and
the smartphone that installed REC Remote can keep connection at a
practical distance.
Procedure:
Note 1: The procedure is shown from the continuation of step 6 on the left.
1. Tap the [
(REC)] button displayed on the smartphone etc.
z
screen while the smartphone etc. is paired with this unit, the re-
cording paused state is entered. Then tap [
2. While the state of step 1, place the this unit on a stand, etc. Leave
the smartphone etc. have hold in your hand, gradually leave 20
to 30 m from this unit.
3. Check that the connection can be kept without problems at a
position 20 to 30 m away from the this unit.
20 to 30 m
Sony CONFIDENTIAL
For Authorized Servicer
] to start recording.
X
Tap [
] button
z
1
Tap [
] button
X
2
– Continued on next page –
SYS SET
Advertisement
Table of Contents
