Kubota WG972-E2 Workshop Manual page 104

WG972-E2, DF972-E2, WSM
Carburetor (Mechanical Governor)
1. Disconnect the connector of LPG solenoid (for DF972) (4) and
the connector of gasoline solenoid (3).
2. Disconnect the breather hose (4).
3. Remove the air cleaner flange (2) and air cleaner gasket.
4. Disconnect governor rod (6) from carburetor (7) and remove the
carburetor (7).
5. Remove the carburetor flange and gasket.
■
NOTE
• Do not bend the governor rod (6), when disassembling and
assembling the carburetor.
• Do not stretch the governor rod spring (5) when
disassembling and assembling the carburetor.
Tightening torque Carburetor mounting nut
(1) Breather Hose
(2) Air Cleaner Flange
(3) Gasoline Solenoid Connector
(4) LPG Solenoid Connector
Governor Lever and Carburetor (Electronic Governor)
1. Disconnect the connector of LPG solenoid (for DF972) and the
connector of gasoline solenoid.
2. Loosen the governor lever nut.
3. Remove the governor lever (7) with governor rod (5) and
governor spring (6).
4. Disconnect the breather hose (3).
5. Remove the air cleaner flange (2) and air cleaner gasket.
6. Remove the carburetor (4).
7. Remove the carburetor flange (8) and gasket.
■
NOTE
• Do not bend the governor rod (5), when disassembling and
assembling the carburetor.
• Do not stretch the governor rod spring (6) when
disassembling and assembling the carburetor.
Tightening torque Carburetor mounting nut
(1) Actuator
(2) Air Cleaner Flange
(3) Breather Hose
(4) Carburetor
S-34
GASOLINE / LPG ENGINE
23.5 to 27.5 N·m
2.4 to 2.8 kgf·m
17.4 to 20.2 ft-lbs
(5) Governor Rod spring
(6) Governor Rod
(7) Carburetor
W1126561
23.5 to 27.5 N·m
2.4 to 2.8 kgf·m
17.4 to 20.2 ft-lbs
(5) Governor Rod
(6) Governor Spring
(7) Governor Lever
(8) Carburetor Flange
W1128201
KiSC issued 01, 2006 A