Advertisement
DMX512 CONFIGURATION
Channel 1
Channel 2
Shutter
Gobo / Color
Reflector mirror
255
Fast strobe
255
Fastest speed
255
246
Slowest speed
135
128
Gobo 14 / Green + Pink
121
120
Gobo 13 / White
112
Gobo 12 / Blue
104
Gobo 11 / Orange
96
Gobo 10 / Magenta
88
Gobo 9 /Pink
80
Gobo 8 / Light Blue
72
Gobo 7 / Magenta
64
Gobo 6 / Red
56
Gobo 5 / Orange
48
Gobo 4 / Green
40
Gobo 3 / Yellow
32
Gobo 2 / Blue
24
Gobo 1 / Multicolor
Slow strobe
16
15
Open
10
8
Stopped
Blackout
0
0
0
open
1
2
3
4
5
• Start the address
How to address your DMX512 system:
1. Select the channels of DMX controller
2. Dipswitches
Dip
#1
#2
#3
Value
1
2
4
• Examples:
Channel 01： dip / on : #1（ =1）
Channel 06： dip / on : #2, #3（
Channel 11： dip / on : #1, #2,#4（
Channel 16： dip / on : #5（ =16）
Channel 3
Channel 4
Pan
Flat
Barrel
Flat
Stopped
Stopped
Stopped
6
7
8
9
10
11
#4
#5
#6
#7
8
16
32
64
2+4=6）
1+2+8=11）
A. GENERAL INSTRUCTIONS
Channel 5
Tilt
Barrel
Stopped
Please read the enclosed instructions carefully as they include important
points about safety for the installation, usage and maintenance of the unit.
• Please keep this booklet with the unit for future consultation. If you sell the unit
to another user, be sure that the new user also receives this instruction booklet
thus giving them the necessary information about the use and general
warnings regarding the unit.
Stopped
• Before the initial start-up, please unpack and carefully check all components in
case any damage may have occurred during shipping.
• Locate a suitable spot for your device where there is good ventilation. Also,
make sure that no ventilating fans or slots are blocked.
• Protect our environment! Please dispose of the packing boxes properly.
Stopped
• The electrical work that is necessary for installation must done by qualified
12
13
14
personnel.
• Always remember to unplug the unit from the main power before any service is
done. Do not open the unit. There are no serviceable parts inside.
• It is very important to ground the yellow/green conductor to earth in order to
meet regulations for safety.
• Check the surrounding area and make sure there are no flammable liquids, water
or metal objects that could enter the fixture. If a foreign object enters the unit,
#8
#9
immediately disconnect the main power. Also, place the fixture in a well-
128
256
ventilated room at about 15 cm from the walls.
• Do not touch any wires during operation, as high voltage is hazardous.
• In the event of serious operating problems, stop using the unit immediately.
Never try to repair the unit yourself. Repairs carried out by unqualified
personnel can lead to damage or malfunction. Please contact the nearest
authorized Technical Assistance Center. Always use genuine spare parts.
Advertisement
