Advertisement
( 2 ) Preprogram functions
DMX-100 can be linked together as master/slave in 2 or 4 channels and run
by built in preprogrammed chase sequences by sound activation. When sound
stops, all the lights will shut down (blackout) immediately and then the bulb will
turn off 15 seconds later. Please refer to the unit dipswitch-setting table for how
to set the dipswitches to achieve master/slave linking.
•In master/slave mode, the dipswitch 10 must be on of the master unit.
2-Channels dip switches setting
Master
Slaver 1
DMXS/DMXB can be linked together as master/slave in daisy chain in
linkage as many units as required and run by built in preprogrammed chase
sequences automatically or by sound activation. Not need to set the
dipswitches in master/slave mode.
When linking the PANTHER and the JAGUAR in stand-alone mode, the
JAGUAR must be used as the master head.
2-light show
＊
Dipswitch 10 "off" means the unit works normally and "on" means inversion. In
order to creating a great light show, you can set dip switch 10 "on" on any unit
that is linking to the master unit to get contrast movement to each other, even if
you have two units only. Dipswitch 10 on the first unit is no use in the DMX linking,
as it is the master unit that operates the light show.
4-Channels dip switches setting
Master
Slaver 1
Slaver 2
Slaver 3
Advertisement
