Configuring The Device To Use A Static Ip Address; Figure 5-2 Proxy Settings - Motorola MC40 Integrator Manual

Procedure Steps
1 In the network dialog box, touch a network.
Touch Show advanced options checkbox.
2
3 Touch Proxy settings and select Manual.

Figure 5-2 Proxy Settings

4 In the Proxy hostname text box, enter the address of the proxy server.
In the Proxy port text box, enter the port number for the proxy server.
5
When entering proxy addresses the Bypass proxy for field, do not use spaces or carriage returns between
addresses.
6 In the Bypass proxy for text box, enter addresses for web sites that do not require to go through the proxy
server. Use the separator "|" between addresses.
7 Touch Connect.
8 Touch

5.4 Configuring the Device to Use a Static IP Address

By default, the device is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an Internet
protocol (IP) address when connecting to a wireless network. To configure the device to connect to a network
using a static IP address:
MN000112A01 - September 2013
.
5.4 Configuring the Device to Use a Static IP Address
5-5