MC40 Integrator Guide
Figure 4-8 IP Output Screen
4.6.5.1 Using IP Output with IPWedge
IPWedge is a computer application that can be easily configured to retrieve data sent over network by DataWedge IP
Output. Refer to the IPWedge User Manual on how to install and configure in a host computer. To enable IP Output
to send captured data to a remote computer that is installed with IPWedge:
Procedure Steps
In IP Output, touch Enabled.
1
Step result: A check appears in the checkbox.
Ensure Remote Wedge option is enabled.
2
3
Touch Protocol.
4-22
MN000112A01 - September 2013