Static Ip Address - Motorola MC40 User Manual

5 - 6 MC40 Integrator Guide
Touch > Setting > Wireless & networks.
1.
Touch Wi-Fi settings.
2.
In the Wi-Fi networks list, touch and hold the name of the network.
3.
In the menu, touch Forget network.
4.
Touch .
5.

Static IP Address

By default, the MC40 is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an Internet
protocol (IP) address when connecting to a wireless network. To configure the MC40 to connect to a network
using a static IP address:
Touch > Setting > Wireless & networks.
1.
Touch Wi-Fi settings.
2.
Touch > Advanced.
3.
Touch Use static IP checkbox.
4.
Touch IP address and enter an IP address for the device and then touch OK.
5.
If required, touch Gateway and enter a gateway address for the device and then touch OK.
6.
If required, touch Netmask and enter an netmask for the device and then touch OK.
7.
If required, touch DNS 1 and enter a Domain Name System (DNS) address and then touch OK.
8.
If required, touch DNS 2 and enter a DNS address and then touch OK.
9.
Touch .
10.