MC40 Integrator Guide
9
In the Device-Config dialog box, touch OK.
Figure 7-8 Reboot Confirmation Dialog Box
10 The device powers off and then reboots and the new configuration settings are applied.
7.3 Returning to the Default Configuration
To return either the master or client the MC40 to the default configuration:
Procedure Steps
1
Touch
.
2
Touch
.
3
Touch Default Configuration.
Touch OK to return the device to the default settings.
4
Step result: The device powers off and then reboots.
7-8
MN000112A01 - September 2013