Bosch Rexroth IndraControl VDP 16.3 Project Planning Manual page 50

44/57
IndraControl VDP 16.3/40.3/60.3/90.3/92.3
Bosch Rexroth AG R911323862_Edition 07
IndraControl VDP 16.3, VDP 40.3, VDP 60.3 Operator Dis‐
9. To start the service, enter "Net start VDP_USB_Monitor_Service" or
restart the control cabinet PC.
To use the VDP USB monitor service, install the "VCredist 2010
SP1" (Microsoft Visual C++ redistributable package) provided
upon delivery.
If VCredist 2010 SP1 is not yet installed on your PC, double-click
on "vcredist_2010_SP1_x86.exe" in the folder "C:\Support
\Rexroth\VDP_USB_Monitor_Service".
To exit the service, proceed as follows:
1. Press Start to open the start menu.
2. Enter "Cmd" into the "Search programs/files" search box.
3. Next, select "Cmd" in the search results, right-click to open the context
menu and select "Run as administrator".
4. Click on Yes to confirm the user account control prompt.
5. Go in the command
\VDP_USB_Monitor_Service"
VDP_USB_Monitor_Service".
To uninstall, proceed with the following steps:
1. Press Start to open the start menu.
2. Enter "Cmd" into the "Search programs/files" search box.
3. Next, select "Cmd" in the search results, right-click to open the context
menu and select "Run as administrator".
4. Click on Yes to confirm the user account control prompt.
5. Go in the command
\VDP_USB_Monitor_Service"
"VDP_USB_Monitor_Service - remove".
line window to "C:\Support\Rexroth
and then enter
line window to "C:\Support\Rexroth
and then
play
"Net Stop
enter