Table of Contents
Advertisement
5.4.HDBaseT Receiver Board (PN-ZB03H) 4
PN-ZB03H FAQ
Q：Is it necessary to connect all the interfaces, including HDMI, RS-232C, LAN and USB to a HDBaseT
transmitter and a PC?
A：No. When transmitting only videos and audios, you may connect only HDMI between transmitter and PC.
The following shows how to use each interface: HDMI: video and audio, RS-232C: control signal,
LAN: display control and USB: operating PC from a display
Q：Is it possible to display on multiple monitors?
A：Yes. When the displays supports daisy-chain connection, you can display a video on multiple monitors by
connecting displays in daisy-chain. You can use commercially available distribution transmitter when the
display doesn't support daisy-chain connection or the displays are installed far from each other.
Q：Is it possible to display a video by using Cat.5e cable or UTP cable(an unshielded cable)?
A：No. We don't guarantee the operation via Cat.5e, the earlier standards, or UTP cable.
Q：Is it possible to transmit infrared remote control signal or to receive power?
A：No. It doesn't support them.
Q：What kind of USB devices can be used?
A：You can use USB mouse pad and USB keyboard compatible with HID class.
When using USB devices, you need a transmitter compatible with HDBaseT 2.0.
Confidential
Copyright © All rights reserved, SHARP CORPORATION
68
Advertisement
Table of Contents
