Table of Contents
Advertisement
3.4.Installation flow
Check the operation and the display
Make sure to check the operation and the display
so that you wouldn't have to detach displays if
initial failure is confirmed after the completion of
installation.
1. Open
the package
8. Turn on (completion)
NG
Note: Keep the packing
materials till the
completion of installation.
Confidential
2. Remove the protective
film and corner protective
materials
7. Combine
Repacking, Repairing
Copyright © All rights reserved, SHARP CORPORATION
Reattach the protective film and corner
Install with the protective film and corner
protective materials reattached to protect
displays from flaws in installation.
3. Check the
operation and the
display
OK
NG
6. Remove the protective
film and corner protective
materials
protective materials
4. Reattach the protective film
and corner protective materials
5. Install
29
Advertisement
Table of Contents
