Table of Contents
Advertisement
4.2.Determine a video wall layout by DITwC (1)
This software can minimize the color/brightness variation between displays and achieve the optimum layout.
The color adjustment is sufficient even without this function, however, if the measurement data can be acquired
before installation, you can determine an optimum layout which further reduces variation of color/brightness
between displays in a video wall.
Layout Flow
1 – Acquiring Measurement Data
Before Installation
Inquire SHARP sales subsidiaries.
On the Installation Site
Acquiring measurement data using
*
DITwC
via LAN
*DITwC... Display Installation Tool with Calibration Utility. Refer to DITwC manual for further information.
Confidential
2 – Determination layout with DITwC
(Procedure for Layout)
1. At the [Calibration]-[Layout/RGB
Contrast Adjustment]-[Layout] screen,
set the video wall condition
(e.g. 2 x 2 landscape)
2. Select measurement results folder
3. By clicking the [Simulate
Recommended Layout], calculations result
will appear by serial no.
LAN
Hub
Copyright © All rights reserved, SHARP CORPORATION
Layout Result
*
Layout Result (Figure)
(1)
(2)
(3)
51
Advertisement
Table of Contents
