Table of Contents
Advertisement
4.6.Calibration with measuring devices(5)
Factory calibration data has been stored in the display.
The visibility of color unevenness between displays may be increased by temperature differences between
in the factory and in the installation location and by the degradation depending on the purpose of use.
Measure color again and re-adjust with DITwC
Measuring devices
1. Contact type
2. Non-contact type
*3 When measuring and adjusting one display, use the contact type, not the non-contact one.
1. Contact type
Measure each display separately.
A measuring device
*1 DITwC...Display Installation Tool with Calibration Utility
*4 Can connect via also RS-232C
Refer to DITwC manual for further information.
Confidential
・Datacolor Spyder3Pro
・X-rite ColorMunki Photo/ Design
*2 Not compatible with Windows 8/8.1/10.
*3
・FLIR Integrated Imaging Solutions, Inc Blackfly GigE/PoE (BFLY-PGE-
05S2C-CS)
Adjustment PC
USB
*4
LAN cable
Copyright © All rights reserved, SHARP CORPORATION
*1
to achieve color consistency across the whole video wall.
Recommended models
*2
/Spyder4Pro/Spyder5Pro
2. Non contact type
The whole video wall
can be measured at a
time.
A measuring device
Adjustment PC
LAN
55
Advertisement
Table of Contents
