Table of Contents
Advertisement
2.9.Connecting devices 2
DisplayPort Output Terminal
・Videos of the current input mode can be output to an external device by a DisplayPort output terminal.
・ An external device which supports HDCP is required in outputting HDCP-encrypted video.
HDCP version：DVI/HDMI: 1.4, DisplayPort: 1.3
・This terminal allows the daisy chain connection of
other through the Display Port input terminal. If the number of daisy-chained displays exceeds the
maximum limitation number, video might not be displayed properly.
-HDCP-encrypted video signals: up to
-The first display is "D-SUB[COMPONENT]" : up to
-The first display is "DisplayPort(MST
・In daisy-chained connection, the length of DisplayPort cables is:
-Normally :up to 3m
-DisplayPort video signal(MST)
The displays are connected by commercially available 4K-compatible cables.
Confidential
up to 25 displays
4
displays
)" : up to
*
2
displays
*
: up to 2m
OUT
IN
・DisplayPort
・HDMI
・DVI-D
・D-Sub15P
・HD-BaseT(OP)
Copyright © All rights reserved, SHARP CORPORATION
by connecting the displays to each
4
displays
DisplayPort
OUT
IN OUT
DisplayPort
IN
IN
OUT
<4 daisy-chained displays>
*MST: MultiStream
DisplayPort
20
Advertisement
Table of Contents
