Connection List/Ppp; Ppp/Multilink; Multilink/Mode; Multilink/Fragment - ADTRAN Express 4100 User Manual

Connection List/PPP

61200176L2-1
The Express 4100/4110 supports the IETF standards for the Point-to-
Point Protocol. The PPP state machine running in the Express 4100/4110
can be fine-tuned to support many applications that can be employed.
The configurable items under this menu can be changed from their
default values for special cases.

PPP/Multilink

Multilink PPP allows the two B-channels to be used together for
increased bandwidth.

Multilink/Mode

Write security: 3; Read security: 5
When this item is set to On (def), Multilink PPP is negotiated with
the PPP peer. When Off, the Express 4100/4110 will only allow one
B-channel for this connection.

Multilink/Fragment

Write security: 3; Read security: 5
When this item is set to Yes (def), the Express 4100/4110 will split
outgoing packets greater than 128 bytes into two Multilink frag-
ments and simultaneously transmit them one per B-channel. The
receiving PPP peer will then reassemble them. This decreases the
transport delay. However, some legacy equipment might have
trouble handling fragmented packets, in which case this option
should be set to No.

Multilink/BACP

Write security: 3; Read security: 5
The Bandwidth Allocation Control Protocol (BACP) and Band-
width Allocation Protocol (BAP) are used to enhance Multilink PPP.
Together, they allow phone numbers to be exchanged when more
bandwidth is needed and member links to be dropped when band-
width is to be decreased. When this item is set to On, BACP is
negotiated with the PPP peer. When Off, the Express 4100/4110
will not run BACP/BAP but dynamic bandwidth can still be oper-
ated.
Express 4100/4110 User Manual
Chapter 3. Terminal Menu Operation and Structure
3-47