Telephone Connection (4110 Only); Basic Telephone Service; Dtmf Keypad; Supplementary Services - ADTRAN Express 4100 User Manual

Chapter 2. Installation

TELEPHONE CONNECTION (4110 ONLY)

Basic Telephone Service

Supplementary Services

DTMF Keypad

2-2
The Express 4110 supports an analog DTMF telephone type (AT&T 2500)
with the POTS interface, part number 1200176L2. Two telephones or
other analog devices (like a fax machine or modem) plug into either RJ-11
jack (labeled with drawings of telephones) on the rear of the unit. Using a
multipoint line allows the POTS and data port to have unique phone
numbers.
Supplementary services such as call holding, three- or six-way conferenc-
ing, call transfer, and call waiting are fully supported by the Express
4100/4110 on a touch-tone telephone. Table 2-1 explains how the flash-
hook is used for handling multi-call situations.
The following functions are performed on a touch-tone phone:
Disable call waiting:
Enable call waiting:
Redial last number:
Enable ExpertISDN:
Enter Area Code:
Enter Phone Number 1:
Enter Phone Number 2:
Express 4100/4110 User Manual
Press **0
Press **1
Press **5
Press **6
Press **7XXX (where XXX is a 3-digit
area code. This must be entered first,
before enabling ExpertISDN.)
Press **8XXXXXXX (where XXXXXXX
is the 7- digit phone number. This must
be entered before enabling Exper-
tISDN.)
Press **9XXXXXXX (where XXXXXXX
is the 7-digit phone number. If only one
phone number is assigned, this does not
have to be entered.)
61200176L2-1