Notes On Safety; Symbols And Icons - Parkside PWS 125 E4 Original Instructions Manual

GB IE
of the grinding spindle .......... max. 12 mm
Safety class .....................................
Protection category ..........................IPX0
Sound pressure level
(L ) ................... 93,2 dB(A); K
pA
Sound power level (L
measured ........ 104,3 dB(A); K
guaranteed ......................... 107 dB(A)
Vibration (a ) .... 12,104 m/s
h
The vibration values represent maximum
values which have been determined with
the supplied blade. The actual vibration
values may vary depending on the used
accessories.
The vibration values are still affected by
the handling for the user's.
Cutting disc (included):
Idling speed n .............. max.12200 min
0
Disc speed ........................max. 80 m/s*
Outer diameter ................... Ø 125 mm
Bore hole ........................ Ø 22,23 mm
Thickness ................................... 3 mm
*
The grinding disc must keep a rotational
speed of 80 m/s.
Levels of noise and vibration were determi-
ned according to the norms and regulati-
ons in the declaration of conformity.
The vibration emission value has been
measured according to a standardised
testing method and may be used for com-
parison with another electric tool.
The indicated vibration emission value
may also be used for an introductory as-
sessment of the exposure.
Warning:
The vibration emission value whilst
actually using the electrical tool
may vary from the given values in-
dependently of the type and way in
28
= 3 dB
pA
)
WA
= 3 dB
WA
2 ; K= 1,5m/s
which the electric tool is used.
II Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
2 be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).

Notes on safety

Caution! When using power tools,
observe the following basic safety
measures for the prevention of electric
shocks and the risk of injury and ire.
-1 Please read all these instructions
before using this electric tool and
please keep the safety instructions.

Symbols and icons

Symbols on the device:
Warning!
Risk of injury from the rotating tool!
Keep hands away.
Warning! Electric shock hazard.
Always unplug the device before
working on it.
Read the manual!
Wear ear protection
Wear eye protection
Wear breathing protection