English
1
2
► Depress lock button (1) and hold it in that position.
► Pull or push the control handle (2) to the required position.
► Release the lock button (1).
► Move the control handle (2) back and forth until it
engages.
7.2
Adjusting Angle of Control Handle
The control handle can be set to two positions (0° and 90°).
► Switch off the trimmer and disconnect extension cable's
coupling from trimmer's plug.
► Hold the shaft firmly.
3
► Depress lock button (1) and hold it in that position.
► Turn the control handle (2) 90° on the shaft.
► Release the lock button (1).
► Move the control handle (2) back and forth until it
engages.
14
1
2
7.3
Adjusting the Loop Handle
The loop handle can be set in different positions to suit the
height and reach of the user.
► Switch off the trimmer and disconnect extension cable's
coupling from trimmer's plug.
► Loosen the star knob nut (1).
► Swing the loop handle (2) to the required position.
► Tighten down the star knob nut (1) firmly.
8 Connecting to Power Supply
8.1
Connecting Trimmer to Power Supply
1
2
► Insert the plug (1) into the extension cable coupling (2).
8 Connecting to Power Supply
2
1
3
0458-777-0121-C