Furuno M12-05BM+05BF-010 Design Manual page 7

1.5 T-connector
There are two types of T-connectors: Mini for heavy backbone cable, Fig.17 and Micro for light
backbone cable, Fig.18.
Parts Name
Mini T-connector
Micro T-connector SS-050505-FMF-TS001
Female
Fig.17 Mini T-connector
(NC-050505-FMF-TS001)
1.6 Terminator
Furuno CAN bus 120-ohm terminators are available with the following part numbers. The
terminator should be attached at each end of the backbone cable.
The terminator has a 120-ohm resistor across pins #4 and #5.
Parts Name
Male terminator
Female terminator LTWMN-05AFFT-SL8001
Male terminator
Female terminator LTWMC-05BFFT-SL8001
Fig.19 Male terminator for heavy cable
Fig.21 Male terminator for light cable
Type
NC-050505-FMF-TS001
Female, Micro
Type
LTWMN-05AMMT-SL8001
LTWMC-05BMMT-SL8001
Code Number
000-160-507
000-168-603
Female
Male
Fig.18 Micro T-connector
(SS-050505-FMF-TS001)
Code Number
000-160-508
000-160-509
000-168-604
000-168-605
Fig.20 Female terminator for heavy cable
Fig.22 Female terminator for light cable
7
Furuno CAN bus Network Design Guide
Remarks
for heavy cable
for light cable
Female
Remarks
Mini connector, Fig.19
Mini connector, Fig.20
Micro connector, Fig.21
Micro connector, Fig.22
Male