Furuno M12-05BM+05BF-010 Design Manual page 6

6 mm
The following list shows the backbone/drop cables. To extend the backbone cable, use the
cable with a male connector on one end and a female connector on the other. For example, if
you need 15 meter cable, connect two 6 m cables, a 2 m cable, and a 1 m cable. Either heavy
cable or light cable is used as a backbone cable.
Note that the length of drop cable is 0 to 6 m.
Parts Name
CAN bus light cable (1 m)
CAN bus light cable (2 m)
CAN bus light cable (6 m)
CAN bus light cable (1 m)
CAN bus light cable (2 m)
CAN bus light cable (6 m)
CAN bus heavy cable (1 m) CB-05PM+05BF-010
CAN bus heavy cable (2 m) CB-05PM+05BF-020
CAN bus heavy cable (6 m) CB-05PM+05BF-060
CAN bus heavy cable (1 m) CB-05BFFM-010
CAN bus heavy cable (2 m) CB-05BFFM-020
CAN bus heavy cable (6 m) CB-05BFFM-060
Fig.15 CAN bus light cable
with a connector at both ends
Fig.13 Female Micro connector
Fig.14 Male Micro connector
Type
M12-05BM+05BF-010
M12-05BM+05BF-020
M12-05BM+05BF-060
M12-05BFFM-010
M12-05BFFM-020
M12-05BFFM-060
6
Furuno CAN bus Network Design Guide
5 4
3
14.5 mm
1
2
3
4
5
14.5 mm
1 2
Code Number Connector fitted
000-167-962 Male and Female
000-167-963 Male and Female
00-167-964 Male and Female
000-167-965 Female
000-167-966 Female
000-167-967 Female
000-167-968 Male and Female
000-167-969 Male and Female
000-167-970 Male and Female
000-167-971 Female
000-167-972 Female
000-167-973 Female
Fig.16 CAN bus light cable
with a connector at one end