Furuno M12-05BM+05BF-010 Design Manual page 18

Furuno CAN bus Network Design Guide
Device
Device Device
FI-5002
CN2 CN2
Terminator
Terminator
12 Vdc
Device
T-connector
Fig.44 Network with two terminators connected to T-connectors
FI-5002 FI-5002
FI-5002
CN2 CN2
CN2 CN2 CN2 CN2
12 Vdc
Fig.45 Three FI-5002 in network
1.13 NavNet Bridge
Two or more CAN bus networks can be connected by using MFD and DRS via Ethernet as
shown in Fig.46. All devices share the sensor data in the network. The connection of the
DRS having a CAN bus network to the MFD in the bridge eliminates the duplication of the
cable run to the sensors outside.
Device
Device
DRS
CAN bus network (1)
Outside bridge
Ethernet
MFD8/12/BB
Device
Device
Power supply
Device
Device
CAN bus network (2)
Fig.46 Simplified NavNet Bridge connecting two CAN bus networks
18