Data Management And Therapy Compliance; Remote Monitoring - ResMed AirSense 11 Manual

Data management and therapy compliance

For therapy management, the AirSense 11 device stores patient therapy data on the device and may have
the ability to transfer it remotely to the care provider if wireless network is available. Data can then be
accessed via ResMed's AirView ™ therapy management solution.
The AirSense 11 device also stores data on the SD card. This data can be transferred via an SD Card
Reader to ResMed's ResScan ™ therapy management system. The SD card should not be used for any
other purpose as it may corrupt therapy data stored on the card. Do not remove the SD card from the
device when the SD light is flashing, because data is being written to the card.
For more information on therapy management with AirView or ResScan, refer to the manuals supplied
with the software.

Remote monitoring

The AirSense 11 device has cellular communication which has the ability to automatically transmit
summary and detailed data on a regular basis. It also allows you to change settings remotely.
The Wireless signal strength icon displayed at the top right of the screen indicates the signal strength.
Advise the patient to check the signal strength on their device.
Therapy data might not be transmitted if used outside of the country or region of purchase.
For AirSense 11 devices that are bundled with an SD card, they will already be inserted and ready to use.
Once the data is loaded into ResScan or AirView via the SD Card Reader, you can review and analyze data,
as well as update therapy settings and transfer them to the patient's device via the SD card.
To remove the SD card cover and insert SD card:
1. Push the SD card cover.
2. Remove the SD card cover and keep the SD card cover in a safe place.
3. Insert the SD card.
4. Push in the SD card until it clicks in place.
To remove the SD card:
1. Push in the SD card to release it.
2. Place the SD card in the protective folder and follow your care provider's instructions.
32