Disassembling - ResMed AirSense 11 Manual

Disassembling

Before disassembly, turn off the device and ensure the AC adapter has been removed.
Cleanable Humidifier tub
1. Hold the humidifier tub at the top and bottom, press it gently and pull it away from the device.
Note: take care when handling the humidifier tub as the humidifier tub may be hot. Allow 10 minutes
for the heater plate and any excess water to cool.
2. Hold the base of the humidifier tub and fully open the humidifier tub lid and pull it away so that it easily
detaches from the base.
Air tubing
1. Pinch the cuff of the air tubing, and gently pull it away from the device.
2. Hold both the cuff of the air tubing and the swivel of the mask, then gently pull apart.
Outlet connector
1. Locate the outlet connector on the inside of the device and release it by pressing the clip firmly.
2. Remove the outlet connector by pulling it out through the outlet connector socket at the rear of the
device.
28