Therapy Data - ResMed AirSense 11 Manual

To update the setting for Tube Temperature, Clim ate Control, or Hum idity Level, tap M Y OPTIONS
from the Ho me screen, go dow n the list of options, and select the setting.
Note: Tube Tem p Auto setting is only relevant w hen using the Clim ate Control Auto setting. If Clim ate
Control is set to Manual, Auto set temperature is not a valid selection.
Tube Tem perature
1. Tap Tube Temp.
2. Tap the preferred setting.
3. Tap OK to save the change.
Note: The temperature and humidity settings are not measured values.
Therapy dat a
The AirSense 11 device records your therapy data for view ing and adjusting by your care provider if
required. The data is transferred to your care provider in the follow ing methods:
Wireless
The device is equipped w ith cellular communication that allow s your sleep therapy data to be w irelessly
transmitted to your care provider. It also allow s for prescribed settings to be applied or updated.
Transfer of data w ill occur after therapy has stopped. Leave your device connected to the pow er outlet at
Climate Control
1. Tap Clim ate Control.
2. Tap Manual.
3. Tap OK to save the change.
Hum idity Level
1. Tap Hum idity Level.
2. Tap the preferred setting.
3. Tap OK to save the change.