Brother PC-420 Operation Manual page 36

GETTING READY ———————————————————————————————————————————————————
a Press (settings key) in the operation panel.
The settings screen appears.
b Press , ,
is selected.
c Press (OK key).
The screen for selecting the twin needle
appears.
d Press to select
To return to , press
The twin needle can now be used.
e Press (OK key).
The initial stitch screen appears again, and
appears in the lower-left corner of the
screen.
• Even after the sewing machine is turned off,
the twin needle setting is not cancelled.
CAUTION
●
When using the twin needle, be sure to
select the twin needle setting, otherwise
the needle may break or the machine
may be damaged.
30
and (arrow keys) until
.
.
f Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 68).
• For details on the stitches that can be sewn
with the twin needle, refer to "Stitch
Settings" (page 128).
CAUTION
●
When using the twin needle, be sure to
select an appropriate stitch, otherwise
the needle may break or the machine
may be damaged.
Start sewing.
g
• For details on starting to sew, refer to
"Starting to sew" (page 49).
Two lines of stitching are sewn parallel to
each other.
CAUTION
●
When changing the sewing direction,
press (needle position button) to
raise the needle from the fabric, and then
raise the presser foot lever and turn the
fabric.