Brother PC-420 Operation Manual page 128

UTILITY STITCHES ——————————————————————————————————————————————————
5 Check the sewn pattern.
If the part of the pattern indicated in the
illustration is sewn uniformly, the pattern is
correctly aligned.
If the pattern is not sewn correctly, following
the steps below to adjust the sewing.
6 Press (settings key) in the operation panel.
The settings screen appears.
7 Press , ,
is selected.
8 Press (OK key).
The screen for adjusting the pattern appears.
9 Press (–) or
Make the necessary adjustments according
to how the pattern is sewn.
Press to increase the adjustment setting.
Press to decrease the adjustment setting.
0 Start sewing again, and then check the
pattern.
Continue adjusting the pattern until it is sewn
correctly.
122
and (arrow keys) until
(+).
a When the pattern is sewn correctly, press
(OK key).
The initial stitch screen appears again.