General Sewing Procedure - Brother PC-420 Operation Manual

General sewing procedure

Follow the basic procedures below to sew.
Turn on the
1
machine.
2 Select the stitch.
Attach the presser
3
foot.
4 Position the fabric.
5 Start sewing.
6 Cut the thread.
Turn on the sewing machine.
For details on turning on the machine, refer to "Turning on the machine"
(page 11).
↓
Select the stitch appropriate for the area to be sewn.
For details on selecting a stitch, refer to "Selecting stitching" (page 68).
↓
Attach the presser foot appropriate for the stitch.
For details on replacing the presser foot, refer to "Replacing the presser
foot" (page 37).
↓
Place the area to be sewn under the presser foot. Be sure that the fabric
pieces are sewn in the correct order and that the right and wrong sides of
the fabric are aligned correctly.
For details on positioning the fabric, refer to "Positioning the fabric"
(page 48).
↓
Start sewing.
For details on starting to sew, refer to "Starting to sew" (page 49).
↓
Cut the thread at the end of sewing. The thread may also be cut automati-
cally.
For details on cutting the thread, refer to "Cutting the thread" (page 53).
Sewing 47