Enclosed Accessories - Brother PC-420 Operation Manual

Enclosed Accessories

After opening the box, check that the following accessories are enclosed. If any item is missing or damaged,
contact your retailer.
Accessories
The following items should also be enclosed in the box.
1. 2.
10. 11. 12.
20. 21.
28. 29.
* 75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
No. Part Name
1 Buttonhole foot "A"
2 Overcasting foot "G"
3 Monogramming foot "N"
4 Zipper foot "I"
5 Zigzag foot "J" (on machine)
6 Blind stitch foot "R"
7 Button fitting foot "M"
8 Walking foot
9 Quilting foot
10 Stitch guide foot "P"
11 Adjustable zipper/piping foot
12 Non stick foot
13 Open toe foot
14 Seam ripper
15 Bobbin (4)
16 Needle set
Cover A
3. 4. 5.
13. 14. 15.
22. 23. 24.
30.
Part Code
No.
U.S.A. Others
XC2691-051 17
XC3098-051 18
X53840-351 19
X59370-051 20
XC3021-051 21
X56409-051 22
130489-001 23
SA140 XC2214-002 24
SA129 XC1948-002 25
SA160 XA8839-002 26
SA161 XC1970-002 27
SA114 XC1949-002 28
SA147 XC1964-002 29
X54243-001 30
SA156 XA5539-151 31
X58358-051 32
Note
(For U.S.A. only)
● Foot controller: Model N5V
This foot controller can be used on this
machine model NX-400/PC-420.
● The screw of the presser foot holder is
available through your authorized dealer
(Part code: XA4813-051).
● The organized accessory tray is
available,through your authorized
dealer.(Part code: XC4489-051)
6. 7.
16.* 17.
25. 26.
31. 32.
Part Name
Twin needle
Cleaning brush
Eyelet punch
Screwdriver (large)
Screwdriver (small)
Spool cap (large)
Spool cap (medium)(2)
Spool cap (small)
Extra spool pin
Spool net
Foot controller
Grid sheet set
Knee lifter
Operation manual
Quick reference guide
Hard case
8. 9.
18. 19.
27.
Part Code
U.S.A. Others
X59296-051
X59476-051
135793-001
X55467-051
X55468-051
130012-054
X55260-153
130013-154
XC4654-051
XA5523-050
XC1154-051
SA527 XC4549-051
XA6941-052
XE1139-001
XC4546-151,XC4589-051
XC2360-152