Canon imageCLASS 2300 Basic Manual page 79

OK
F3
F4
OK
5
OK
F3
F4
OK
6
Reset
5-14 Registering the Required Sender Information
G If you selected <01 TTI POSITION>:
❑
Press [OK] © press [F3] (M) or [F4] (L) to highlight <01 OUTSIDE IMAGE> or
<02 INSIDE IMAGE> © press [OK].
<01 OUTSIDE IMAGE>: This prints the TX Terminal ID outside the image area
on the output fax.
<02 INSIDE IMAGE>: This prints the TX Terminal ID inside the image area on
the output fax.
The TX TERMINAL ID menu returns.
G If you selected <02 TEL NUMBER MARK>:
❑
Press [OK] © press [F3] (M) or [F4] (L) to highlight <01 FAX> or <02 TEL> ©
press [OK].
<01 FAX>: This prints the letters <FAX> before the telephone number.
<02 TEL>: This prints the letters <TEL> before the telephone number.
The TX TERMINAL ID menu returns.
NOTE
If you selected <02 I-FAX> in step 4, the display for selecting the TTI POSITION
appears. You also cannot select <TEL NUMBER MARK>.
Press [Reset] to return to the Basic Features screen.