Canon imageCLASS 2300 Basic Manual page 127

LOAD THE APPROPRIATE SIZE PAPER
Cause
Remedy
MEMORY FULL
Cause 1
Remedy
Cause 2
Remedy
NO TEL #
Cause
Remedy
NOT AVAILABLE NOW
Cause 1
10
Remedy
Cause 2
Remedy
NOT FOUND, TRY AGAIN
Cause
Remedy
10-4 List of Error Messages
Although <AUTO PAPER> is selected when copying, appropriate size paper is
not set in the paper drawer or on the stack bypass.
Select the paper size, or set the copy ratio.
If you press [Start] while this message is displayed, the paper with the smallest
margin is selected automatically and printing starts.
The machine's memory is full of documents received in memory reception and
confidential reception.
Print the original stored in memory.
The machine's memory is full of scanned documents.
Divide the original into some stacks and scan them one by one.
The telephone number you attempted to dial using one-touch speed dialing,
coded speed dialing, or group dialing was not registered.
Register the telephone number before using it.
You pressed the coded speed dialing key that has already been registered,
while you perform group dial registration.
Check the information registered under the coded speed dialing key before
using it.
You pressed the one-touch speed dialing key that has already been registered,
while you perform group dial registration.
Check the information registered under the one-touch speed dialing key before
using it.
You wish to change the settings of the polling box, preset polling box, transfer
box, confidential box, or relay box but no such box has been registered.
Check the boxes once again.