Accessories (Sold Separately); Related Products - Omron E9NC-AA0 Manual

Iot status monitoring amplifier
Table of Contents

Advertisement

E9NC-AA/VA

Accessories (Sold Separately)

DIN Track
[Refer to Dimensions on page 10.]
A DIN Track is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
Appearance
Shallow type, total length: 1 m
Shallow type, total length: 0.5 m
Deep type, total length: 1 m
Note: For details, refer to DIN Track on PFP-@ which can be accessed from your OMRON website.
End Plate
[Refer to Dimensions on page 10.]
Two End Plates (PFP-M) are provided with the Sensor Communications Unit.
End Plates (PFP-M and E39-EP1) are not provided with the Amplifier Unit. They must be ordered separately as required.
Appearance
Model
PFP-M
E39-EP1

Related products

Sensor Communications unit
Type
EtherCAT
sensor communications unit
Sensor Communications
Unit for CC-Link
*
Distributed Sensor Unit
Refer to your OMRON website for details.
* The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.
®
EtherCAT
is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner
Association.
2
Type
Model
PFP-100N
PFP-50N
PFP-100N2
Quantity
Applicable Amplifier Unit
E9NC-AA0
1
E9NC-VA0
E9NC-AA10
E9NC-AA40
1
E9NC-VA10
E9NC-VA40
Appearance
Model
E3NW-ECT
E3NW-CCL
E3NW-DS
Quantity
1

Advertisement

Table of Contents
loading

Table of Contents