Advertisement
TM 11-6625-1589–15-1
at which that particular maintenance function is
to be performed.
specifies, by code , those tools and test equipment
required to perform the designated function . The
numbers appearing in this column refer to spe
cific tools and test equipment which are identified
in table I.
B- 3 .
Explanation of Format
a.
Column 1 , group number. Column
1 lists
group numbers, the purpose of which is to identi
fy
components,
assemblies,
subassemblies
and
modules with the next higher assembly .
b . Column 2 , functional group. Column 2 lists
the noun names of components, assemblies, sub
assemblies and modules on which maintenance is
authorized .
c . Column 3 , maintenance functions. Column 3
lists the maintenance category at which perform
ance of the specific maintenance function is au
thorized . Authorization to perform a function at
any category also includes authorization to per
form
that
function
at
higher
categories .
The
codes used represent the various maintenance cate
gories as follows :
Direct Support Maintenance
H
B - 4 .
Explanation of Format of Table 1, Tool
a . Tools and Equipment . The numbers in this
column coincide with the numbers used in the
tools and equipment column of the Maintenance
Allocation Chart. The numbers indicate the ap
plicable tool for the maintenance function .
Advertisement
