Advertisement
2-11 .
INSTALLATION .
2-12 .
The Model 204C is fully transistorized ; therefore ,
no special cooling is re
quired .
However , the instrument should not be operated where the ambient temp
erature exceeds 55 ° C ( 131 ° F ) .
2-13 .
BENCH MOUNTING .
2-14 .
The Model 204C is shipped with plastic feet and tilt stand in place ,
ready for
use as a bench instrument.
2-15 .
RACK MOUNTING .
2-16 .
The Model 204C may be rack mounted by using an adapter frame ( -hp- Part
No.
5060-0797 ) .
The adapter frame is a rack frame that accepts any combination
of -hp- submodular units .
It can be rack mounted only .
2-17 .
COMBINATION MOUNTING .
2-18 .
The Model 204C may be mounted in combination with other submodular units
by using a Combining Case ( -hp- Model 1051A or 1052A ) .
The Combining Case is
a full -module unit which accepts various combinations of submodular units.
Being
a full -module unit ,
it can be bench or rack mounted and is analogous to any full
module unit .
2-19 .
REPACKAGING FOR SHIPMENT .
2-20 .
The following paragraphs contain a general guide for repackaging of the
instrument for shipment.
Refer to Paragraph 2-21 if the original container is to
be used ; 2-22 if it is not.
2-21 .
If original container is to be used ,
proceed as follows :
Place instrument in original container if available .
Ensure that container is well sealed with strong tape or metal bands .
2-22 .
If original container is not to be used , proceed as follows :
a .
Wrap instrument in heavy paper or plastic before placing in an inner
container .
b .
Place packing material around all sides of instrument and protect panel
face with cardboard strips .
Place instrument and inner container in a heavy carton or wooden box and
seal with strong tape or metal bands .
Mark shipping container with " DELICATE INSTRUMENT " ,
" FRAGILE "
etc.
Advertisement
