Advertisement
GENERAL
SCHEMATIC
NOTES
PARTIAL REFERENCE DESIGNATIONS ARE SHOWN .
PREFIX
WITH ASSEMBLY OR SUBASSEMBLY DESIGNATION ( S) OR BOTH
FOR COMPLETE DESIGNATION .
2.
COMPONENT VALUES ARE SHOWN AS FOLLOWS UNLESS
OTHERWISE NOTED .
RESISTANCE IN OHMS
CAPACITANCE IN MICROFARADS
I
DENOTES POWER LINE GROUND .
4.
H
DENOTES CHASSIS GROUND.
DENOTES ASSEMBLY .
DENOTES MAIN SIGNAL PATH .
DENOTES FEEDBACK PATH .
DENOTES FRONT PANEL MARKING .
9.
[
DENOTES REAR PANEL MARKING .
DENOTES SCREWDRIVER ADJUST .
11.
O
DENOTES FRONT PANEL CONTROL .
DENOTES COMPONENTS NOT MOUNTED
ON ASSEMBLY .
OPTIMUM VALUE SELECTED AT FACTORY .
14.
$
DENOTES FACTORY USE ONLY .
Advertisement
