Control Array Error Occurs When Installing The Visual Guide; In Wordperfect, The Box Prints But The Text Does Not; When Printing Large Characters (Above 48 Pt), Text Is Missing Within Words - Canon BJC-70 User Manual

Problem
Control array error
occurs when installing
the Visual Guide
In WordPerfect, the BOX
prints but the text
does not
When printing large
characters (above 48 pt),
text is missing within
words (for example, THE
prints as T E)
142
Troubleshooting
Cause
THREED.VBX file is
causing a conflict with
the new files.
The Fast Graphic Printing
option needs to be enabled
(5.2) or disabled (5.1).
Either the video resolution
or the number of colors is
set too high.
There may be a problem
with the video driver.
Solution
If you are using MS-DOS 6.x
or later, type the following
command at the C:\ prompt:
MOVE C:\WINDOWS\SYSTEM
\THREED.VBX
C:\WINDOWS
If you are using MS-DOS 5.x
or lower, type the following:
COPY C:\WINDOWS\SYSTEM
\THREED.VBX
C:\WINDOWS
DEL C:\WINDOWS\SYSTEM
\THREED.VBX
If you are in WordPerfect 5.1
for Windows and the BOX
prints but your text does not
print, follow these steps:
1. Select File.
2. Select Preferences.
3. Uncheck the Fast
Graphic Printing option
for the Windows Printer
Driver.
If you are in WordPerfect 5.2
for Windows, and the BOX
prints but your text does not
print, follow these steps:
1. Select File.
2. Select Preferences.
3. Check the Fast Graphic
Printing option for the
Windows Printer Driver.
Lower the video resolution
to 640 x 480, or lower the
number of colors to 16.
Make sure Video is set to
VGA in Windows Setup.
Chapter 8