Attaching The Ac Adapter - Canon BJC-70 User Manual

Attaching the AC Adapter

C
Use the AC adapter that is appropriate for the voltage and frequency of
your power supply: AC 120 V, 60 Hz, 0.5 A. This is standard for an
electrical outlet in the United States or Canada.
Use only the AC adapter that came with the printer. Use of any other
adapter may damage the printer.
If you smell a peculiar odor or see smoke, unplug the AC adapter
immediately.
Do not place anything in front of your wall outlet that may obstruct
your access to it or put pressure on the AC adapter.
When unplugging the AC adapter, always remove it by holding onto
the adapter unit and not the cord.
Use the AC adapter indoors only.
Always plug the AC adapter into the printer before you plug it into an
electrical outlet.
Always unplug the AC adapter from the electrical outlet before
disconnecting it from the printer.
To attach the AC adapter, follow the steps below.
1. Attach the connector end of the AC adapter into the AC power
receptacle on the back of the printer.
2. Plug the AC adapter into an AC outlet.
14
Setting Up the Printer Chapter 2